FREE NEXT DAY DELIVERY*
* On Orders Over £100
SAME DAY DESPATCH ON MACHINES & MATERIALS
Toggle Nav
Share
Stahls' Stretch Metallic HTV
Get a metallic look on cotton and polyester.
Price from
£6.95
Excl. 20% Vat
Only %1 left
SKU
CC-STRETCH
Stahls' Stretch Metallic HTV
Get a metallic look on cotton and polyester.
Colours include Gold, Silver, Orange Copper Gold, Blue, Green, Red, Gun Metal and Candy Pink.
Price Breakdown
How much profit can you make from your HTV? We've broken it down for you.
The total cost of one metre of Stahls' CAD-CUT Stretch Metallic HTV is £5.95, £148.75 for a 25m roll.
You can fit 1250 designs (10x10 size) on a 25m roll of HTV, resulting in each transfer costing you just £0.12.
If you sell each t-shirt for £20 (and it costs £6 to make) you make £14 profit on each sale. *Your profits may also increase if you produce higher value garmetns such as hoodies and jumpers.
This results in a £17,500 profit from just one roll of Stahls' CAD-CUT Stretch Metallic HTV!
Recommended Fabrics:
- Cotton
- Poly/Cotton Blends
- 100% polyester*
*Testing is always advised
Stretch Metallic Benefits:
- Light finish feels like part of the garment
- Stretch and rebound with your designs
- Premium look for higher perceived value
- 8 different colours
- Great wash quality
- Use on Cotton, Polyester and Poly/cottons
- Easy to weed
Application Instructions:
- Time: 20 Seconds
- Temp: 170°c
- Pressure: Medium (4-6 on a Hotronix Press)
- Peel: Cold (wait 20 seconds)
Recommended tools and accessories :
Cutting Tips:
- Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force is correct.
- For optimal cutting and weeding, maintain a line thickness of at least 1.5 mm (1/16“) for lettering and logos.
- Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
- Different HTV materials and plotter cutter brands require different blades, always have a selection to hand.
Weeding Tips & Tricks:
Weeding your vinyl can be time consuming, with the right techniques and tricks of the trade you can boost efficiency and get more done in less time.
- There's a right way and a wrong way to weed your heat transfer vinyl. Learn the right way so you can get more done in less time.
Occasionally you will find a thin line on this material. This is where the vinyl repeats itself, it is not a defect.
| Select Size | Metre |
|---|
APPLICATION INSTRUCTIONS
Temperature: 170° C l Time: 20 sec. l Pressure: medium/high l Peel: cold (wait 20 secs before removing the carrier for a shinier finish
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as the blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1.5 mm (1/16“) for lettering and logos.
