CAD-CUT Basic Film

Perfectly suited for large designs!

Basic Film Heat Transfer Vinyl is a great economical, durable material for sports names/numbers, leisure, promotional and workwear garments. Ideal for large graphics where the speed of use is paramount.

Available by the metre or by the roll. Rolls are 25m x50cm.

Price Breakdown

How much profit can you make from your HTV? We've broken it down for you.

The total cost of one metre of Stahls' CAD-CUT Basic Film HTV is £3.50, £187.50 for a 25m roll.

You can fit 1250 designs (10x10 size) on a 25m roll of HTV, resulting in each transfer costing you just £0.07.

If you sell each t-shirt for £20 (and it costs £6 to make) you make £14 profit on each sale. *Your profits may also increase if you produce higher value garmetns such as hoodies and jumpers.

This results in a £17,500 profit from just one roll of Stahls' CAD-CUT Basic Film HTV!

Recommended fabrics:

Cotton, Polyester, Polycotton blends

Basic Film Benefits:

• Low cost
• Easy to process
• No back-adhesive carrier
• Matt finish with smooth touch
• Ideal for large designs
• Can be multi layered
• 80 Microns thick

Application Instructions:

• Time: 10-15 seconds
• Temp: 160°c
• Pressure: Medium
• Peel: Cold

Recommended tools and accessories :

• Heat Press
• Plotter Cutter
• Release Paper
• Stahls LED Weeder
• Stahls Ez Weeding Table       

Cutting Tips:

• Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force is correct.
• Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
• Different HTV materials and plotter cutter brands require different blades, always have a selection to hand.

Weeding Tips & Tricks:

Weeding your vinyl can be time consuming, with the right techniques and tricks of the trade you can boost efficiency and get more done in less time.

• There's a right way and a wrong way to weed your heat transfer vinyl. Learn the right way so you can get more done in less time.