Stahls' Silicone 100 Dye Block Heat Transfer Vinyl

For a raised, matt effect on sports and performance wear.

Stahls' Silicone 100 is the latest innovation for sports and athletic wear decorators.

For those asking for HTV with a raised finish to add texture to your garments. Silicone 100 is here to make those dreams come true.

Get the dye-blocking power of silicone without messy ink or the need to burn screens. Simply cut the name, number, or logo, weed, and apply with a heat press.

Simply cut the name, number, or logo with an HTV cutter, weed (use a Stahls LED Weeder for maximum visibility and efficiency), and apply with a Hotronix Heat Press.

Price Breakdown

How much profit can you make from your HTV? We've broken it down for you.

The total cost of one metre of Stahls' CAD-CUT Silicone 100 HTV is £5.95, £148.75 for a 25m roll.

You can fit 1250 designs (10x10 size) on a 25m roll of HTV, resulting in each transfer costing you just £0.12.

If you sell each t-shirt for £20 (and it costs £6 to make) you make £14 profit on each sale. *Your profits may also increase if you produce higher value garments such as hoodies and jumpers.

This results in a £17,500 profit from just one roll of Stahls' CAD-CUT Silicone 100 HTV!

Recommended Fabrics:

• Cotton
• Poly/Cotton Blends
• 100% polyester*
  *Testing is always advised

CAD-CUT® Silicone 100™ Benefits:

• Blocks dye migration, even on sublimated polyester
• Stretchable, with good recovery
• Matt finish, silicone feel
• 7 Colours
• Easy to cut and weed
• Matt finish
• 100 Microns thick (also available in 200 and 500 SPECIAL ORDER)

Recommended tools and accessories :

• Heat Press
• Plotter Cutter
• Release Paper
• Stahls LED Weeder
• Stahls Ez Weeding Table

Cutting Tips:

• Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force are correct.
• Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
• Different HTV materials and plotter cutter brands require different blades, always have a selection to hand.

Application Instructions:

• Time: 10 Seconds
• Temp: 150°c
• Pressure: Medium (4-6 on a Hotronix Press)
• Peel: Cold
• 2nd fuse: Fuse again for a further 5 Seconds