SuperTEK Clear Matt 2.0

SuperTEK Clear Matt 2.0

Stahls' SuperTEK Sublistop 2.0

Printable Media That Inhibits Bleed-Through

SuperTEK® Sublistop™ Printable Heat Transfer Vinyl

Keep transfers vibrant and true to their original colours with SuperTEK Sublistop. Its charcoal-based adhesive inhibits dye migration on sublimated and brightly-coloured polyester garments. 

50cm width x 25m rolls

£260.00 Excl. 20% Vat
SKU
163362

STAHLS'® SuperTEKTM Sublistop 2.0

Inhibits bleed-through

Keep transfers vibrant and true to their original colors with SuperTEK Sublistop. Its charcoal-based adhesive inhibits dye migration on sublimated and brightly-colored polyester garments. Plus, its low application temperature helps you avoid scorching and burning heat-sensitive garments.


From Stahls' the world's leading HTV manufacturer, printable SuperTEK Sublistop 2.0 prints, cuts and weeds easily. For use with solvent and eco solvent print and cut systems.

Available in 50cm width x 25m rolls.

Recommended Fabrics:
  • Cotton
  • Poly/Cotton Blends
  • 100% polyester*
  • Lycra*
  • Spandex*
  • Most Nylon*

*Testing is always advised

SuperTEK Sublistop 2.0 Benefits:

  • Inhibits dye migration
  • Semi-matte finish
  • Lightweight, with a soft hand
  • Excellent stretch and rebound
  • Designed to apply to performance fabrics without scorching or burning
  • ONYX STiX2adhesive with charcoal-based lining inhibits sublimated dyes from bleeding through
  • 50+ washes

Application Instructions:

  • Time: 1st - 5 seconds, then peel back and refuse 2nd for 5 seconds with cover sheet
  • Temp: 150°c
  • Pressure: Medium (4-6 on a Hotronix Press)
  • Peel: Cold

Recommended tools and accessories :

Cutting Tips:

  • Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force is correct.
  • Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
  • Different HTV materials require different blades, always have a selection to hand.

Weeding Tips & Tricks:

Weeding your vinyl can be time consuming, with the right techniques and tricks of the trade you can boost efficiency and get more done in less time.

  • There's a right way and a wrong way to weed your heat transfer vinyl. Learn the right way so you can get more done in less time.

Application Instructions:
Temp: 150°c
Time 1st: 5 seconds then peel mask and re-fuse
Time 2nd: 5 seconds with cover sheet in place
Pressure: Medium (#4-6 on Hotronix®)
Peel: Warm

Care Instructions:
For best results turn the garment inside out

Machine wash up to 40°c using mild detergent
Tumble dry at low temperatures
Do not use bleach
Do not dry clean
Iron on reverse.

Need some help?

01376 32 63 51
01376 55 75 01
01376 55 75 10