CAD-CUT Premium Plus Nylon Heat Transfer Vinyl

CAD-CUT Premium Plus Nylon Heat Transfer Vinyl

Stahls' EconoReflex Heat Transfer Vinyl

Stahls' EconoReflex Heat Transfer Vinyl

Stahls' High Build 3D Heat Transfer Vinyl

Add an extra dimension to designs with an extra raised, fashionable look with the thickest heat transfer vinyl on the market.

Stahls Logo

Price from £10.75 Excl. 20% Vat
SKU
CC-HB-3D

Stahls' High Build 3D™ Heat Transfer Vinyl

Add an extra dimension to designs with an extra thick rubber, fashionable look

At 1mm (1000microns) this is the thickest vinyl we have. If you are looking for an extra raised look on bags, caps, hoodies or jackets. Then this is the vinyl for you.

With a more premium and high-quality finish, Stahls' High Build 3D HTV will immediately increase the value of each of your products.

Stahls' High Build 3D Heat Transfer Vinyl is Vegan and Oeko-TexApproved, allowing you to create high-quality and effective products to suit all of your customers and their requirements.

Available by the metre or in 5-metre rolls, with a matt or gloss finish (all 500mm wide).

High Build can be used for a variety of garments and accessories to create that premium effect with a higher retail price. Check out this live event where Andy demonstrates how to apply Stahls' High Build 3D onto t-shirts, sweatshirts, and caps.

Recommended Fabrics:

  • Cotton
  • Poly/Cotton Blends
  • 100% polyester*
  • Lycra*
  • Performance Wear*
    *Testing is always advised

High Build 3D™ Benefits:

  • Great for bold designs
  • Thickest available vinyl
  • Matt finish
  • High washing resistance 
  • Oeko-Tex Approved
  • Vegan Approved
  • Easy to cut and weed

Recommended tools and accessories :

Cutting Tips:

  • Always carry out a Test-Cut, this will identify if you have a sharp blade and if the pressure and force is correct.
  • Once you have the correct setting, make a visual note and attach it to your cutter for each type of material.
  • Different HTV materials and plotter cutter brands require different blades, always have a selection to hand.
  • Lettering to be cut minimum of 2mm

Application Instructions:

  • Time: 20 Seconds
  • Temp: 155°c
  • Pressure: Medium (4-6 on a Hotronix Press)
  • Peel: Cold
  • Washing: Wait at least 24 hours, wash up to 60c

Download Instructions

 

Application Instructions:
Time: 20 seconds
Temp: 155°c
Pressure: medium
Peel: Cold

 

High Build Vinyl Cutter Settings

Brother Cutter Settings*

· Blade: 10 · Cut Speed: 1 · Cut Pressure: 2+

Cricut Cutter Settings*

· Blade: Standard · Setting: Cardstock Light+

Galaxy Cutter Settings*

· Blade: 45°/60° · Gram Force: 100-110 · Speed: 300mm/s · *Blade Advancing Varies

GCC Cutter Settings*

· Setting: Heat Transfer · Blade: Deep Cut, Setting 16 · Material: (Flocked) Double Cut · Thickness: 20 · Speed: 5 cm/s

Graphtec Cutter Settings*

· Blade: 1.5 · Gram Force: 20 (Tangentile Mode) · Speed: Slow speed for a smooth cut

Roland Cutter Settings*

· Blade: 60° · Force: 150g-190g · Speed: 30 cm/s

Silhouette Cutter Settings*

· Blade: Standard, 10 · Setting: Heat Transfer Material (Flocked) · Speed: 4 · Thickness: 33

*for best results, always perform a test cut. Settings may vary on smaller designs.

Need some help?

01376 32 63 51
01376 55 75 01
01376 55 75 10
RECOMMENDED PRODUCTS