CAD-COLOUR® Magic Mask™ Solution

Be the first to review this product

£250.00
Excl. 20% Vat

Quick Overview

Remove designs from their carrier and transfer to the garment.


Transfer designs cut on your vinyl cutter from the heat transfer material's carrier to the substrate. Medium tack allows you to remove and transfer materials of medium thickness and weight.


500mm X 50m

Remove designs from their carrier and transfer to the garment.


Transfer designs cut on your vinyl cutter from the heat transfer material's carrier to the substrate. Medium tack allows you to remove and transfer materials of medium thickness and weight.

500mm X 50m


Masking Process

Step 1: Remove mask from liner.

Step 2: Position mask over weeded design. Use a squeegee to eliminate air bubbles.

Step 3: Remove design from carrier by pulling at a 90 degree angle.

Step 4: Place masked design back on liner until ready to heat apply.

Save the mask liner to use with the masked design.


Need some help?

01376 32 63 51
01376 55 75 01
01376 55 75 10